Installing bamboo charcoal wall panels typically involves the following steps:

1. **Preparation**:
– Ensure the wall surface is clean, dry, and smooth. Remove any old paint or wallpaper if necessary.

2. **Measure and Plan**:
– Measure the wall area where you want to install the panels. Plan the layout to minimize cuts and maximize visual appeal.

3. **Cutting Panels**:
– If needed, cut the panels to size using a saw. Make sure to wear protective gear while cutting.

4. **Adhesive Application**:
– Apply a strong adhesive suitable for wall panels to the back of each panel. You can also use construction adhesive or double-sided tape.

5. **Positioning Panels**:
– Press the panel firmly against the wall, starting from one corner and working your way across. Use a level to ensure it’s straight.

6. **Securing Panels**:
– If necessary, use finishing nails or a nail gun to secure the panels further. This is particularly useful for larger panels.

7. **Finishing Touches**:
– Fill any gaps or seams with caulk if desired, and paint or stain edges to match your decor.

8. **Curing Time**:
– Allow the adhesive to cure as per the manufacturer’s instructions before applying any additional weight or pressure.

Always refer to the manufacturer’s instructions for specific installation guidelines related to the panels you’re using.